Slip Fit – ID Drill Bushing Set – 16 Piece

Special Air Services-Canada Inc. Slip Fit - ID Drill Bushing Set - 16 Piece <p>This set of Sixteen (16) <strong><em>Slip Fit - </em></strong><em><strong>Internal Diameter</strong></em><strong><em> Drill Bushings</em></strong> has been designed to meet the specific needs for the standard, oversize and undersized fasteners used in the aircraft/aerospace industry.  The sizes in this set have been machined to accommodate the following drill sizes:</p><table width=\"561\"><tbody><tr><td width=\"83\"><p style=\"text-align: center;\">Bushing Size</p></td><td style=\"text-align: center;\" width=\"64\"><p>Number</p></td><td style=\"text-align: center;\" width=\"64\"><p>Letter</p></td><td style=\"text-align: center;\" width=\"64\"><p>Fractional</p></td><td style=\"text-align: center;\" width=\"9\"> </td><td style=\"text-align: center;\" width=\"85\"><p>Bushing Size</p></td><td style=\"text-align: center;\" width=\"64\"><p>Number</p></td><td style=\"text-align: center;\" width=\"64\"><p>Letter</p></td><td width=\"64\"><p style=\"text-align: center;\">Fractional</p></td></tr><tr><td width=\"83\"><p>0.0980</p></td><td width=\"64\"><p style=\"text-align: center;\">40</p></td><td style=\"text-align: center;\" width=\"64\"> </td><td style=\"text-align: center;\" width=\"64\"> </td><td style=\"text-align: center;\" width=\"9\"> </td><td style=\"text-align: center;\" width=\"85\"><p>0.1990</p></td><td width=\"64\"><p style=\"text-align: center;\">8</p></td><td width=\"64\"> </td><td width=\"64\"> </td></tr><tr><td width=\"83\"><p>0.1285</p></td><td width=\"64\"><p style=\"text-align: center;\">30</p></td><td style=\"text-align: center;\" width=\"64\"> </td><td style=\"text-align: center;\" width=\"64\"> </td><td style=\"text-align: center;\" width=\"9\"> </td><td style=\"text-align: center;\" width=\"85\"><p>0.2010</p></td><td style=\"text-align: center;\" width=\"64\"><p>7</p></td><td style=\"text-align: center;\" width=\"64\"> </td><td width=\"64\"> </td></tr><tr><td width=\"83\"><p>0.1590</p></td><td width=\"64\"><p style=\"text-align: center;\">21</p></td><td style=\"text-align: center;\" width=\"64\"> </td><td style=\"text-align: center;\" width=\"64\"> </td><td style=\"text-align: center;\" width=\"9\"> </td><td style=\"text-align: center;\" width=\"85\"><p>0.2160</p></td><td style=\"text-align: center;\" width=\"64\"><p>3</p></td><td style=\"text-align: center;\" width=\"64\"> </td><td style=\"text-align: center;\" width=\"64\"> </td></tr><tr><td width=\"83\"><p>0.1610</p></td><td width=\"64\"><p style=\"text-align: center;\">20</p></td><td style=\"text-align: center;\" width=\"64\"> </td><td style=\"text-align: center;\" width=\"64\"> </td><td style=\"text-align: center;\" width=\"9\"> </td><td style=\"text-align: center;\" width=\"85\"><p>0.2460</p></td><td style=\"text-align: center;\" width=\"64\"> </td><td style=\"text-align: center;\" width=\"64\"><p>D</p></td><td style=\"text-align: center;\" width=\"64\"> </td></tr><tr><td width=\"83\"><p>0.1850</p></td><td width=\"64\"><p style=\"text-align: center;\">13</p></td><td style=\"text-align: center;\" width=\"64\"> </td><td style=\"text-align: center;\" width=\"64\"> </td><td style=\"text-align: center;\" width=\"9\"> </td><td style=\"text-align: center;\" width=\"85\"><p>0.2500</p></td><td style=\"text-align: center;\" width=\"64\"> </td><td style=\"text-align: center;\" width=\"64\"> </td><td width=\"64\"><p style=\"text-align: center;\">1/4</p></td></tr><tr><td width=\"83\"><p>0.1875</p></td><td width=\"64\"> </td><td width=\"64\"> </td><td width=\"64\"><p style=\"text-align: center;\">3/16</p></td><td width=\"9\"> </td><td width=\"85\"><p>0.2610</p></td><td width=\"64\"> </td><td width=\"64\"><p style=\"text-align: center;\">G</p></td><td width=\"64\"> </td></tr><tr><td style=\"text-align: center;\" width=\"83\"><p>0.1910</p></td><td style=\"text-align: center;\" width=\"64\"><p>11</p></td><td style=\"text-align: center;\" width=\"64\"> </td><td style=\"text-align: center;\" width=\"64\"> </td><td style=\"text-align: center;\" width=\"9\"> </td><td style=\"text-align: center;\" width=\"85\"><p>0.2795</p></td><td width=\"64\"> </td><td width=\"64\"><p style=\"text-align: center;\">K</p></td><td width=\"64\"> </td></tr><tr><td width=\"83\"><p style=\"text-align: center;\">0.1935</p></td><td width=\"64\"><p style=\"text-align: center;\">10</p></td><td width=\"64\"> </td><td width=\"64\"> </td><td width=\"9\"> </td><td width=\"85\"><p style=\"text-align: center;\">0.3125</p></td><td style=\"text-align: center;\" width=\"64\"> </td><td style=\"text-align: center;\" width=\"64\"> </td><td width=\"64\"><p style=\"text-align: center;\">5/16</p></td></tr></tbody></table><p>Each <strong>Drill Bushing</strong> has been turned from <strong><em>Precision Ground Pennsylvania USA O-1 tool stee</em>l</strong>.  The outside diameter of the bushing has been held to a precise tolerance of 0.0501\" ± 0.001”.    After the bushings have are machined, they are heat treated and tempered.  This process produces a bushing with a hardness measurement of 60+ on the Rockwell C scale, making the bushing extremely resistant to wear during use.</p><p>A tray is included in the set.  This tray is machined from 6061-T6 Aluminum.  The top of the tray is engraved with the bushing size for easy identification and organization in your tool box. The tray is anodized to ensure wear and scratch resistance and presents a professional appearance. We have also added rubber feet to the tray to improve stability in handling of the Drill Bushing Set</p><p>We have also incorporated a new feature not normally not found on drill bushing manufactured by others.  We have included a machined receptacle on the outside diameter of the drill bushing to mate with a set screw which has been designed and incorporated into both the SAS Drill Bushing Block, Drill Bushing Cup, and the soon to be released, Drill Bushing Stand.  </p><p>In the case of the Drill Bushing Cup and Drill Bushing Stand, we have installed a stainless-steel <em><strong>thread inset</strong></em> (sometimes referred to as a <em>Helicoil)</em> to add strength and wear resistance to the aluminum, to ensure long and trouble-free use of the retaining set screw.</p>
$395.00

Slip Fit - ID Drill Bushing Set - 16 Piece

CAD $395.00
Slip Fit - ID Drill Bushing Set - 16 Piece
Slip Fit - ID Drill Bushing Set - 16 Piece
Slip Fit - ID Drill Bushing Set - 16 Piece
Slip Fit - ID Drill Bushing Set - 16 Piece
Slip Fit - ID Drill Bushing Set - 16 Piece
Slip Fit - ID Drill Bushing Set - 16 Piece
Slip Fit - ID Drill Bushing Set - 16 Piece
Slip Fit - ID Drill Bushing Set - 16 Piece
Slip Fit - ID Drill Bushing Set - 16 Piece
Slip Fit - ID Drill Bushing Set - 16 Piece
Slip Fit - ID Drill Bushing Set - 16 Piece
Slip Fit - ID Drill Bushing Set - 16 Piece

Slip Fit - ID Drill Bushing Set - 16 Piece

CAD $395.00
Model Number: 9536793-016
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
395.000
8 Left in Stock
Facebook
Twitter
Email
  • Description

This set of Sixteen (16) Slip Fit - Internal Diameter Drill Bushings has been designed to meet the specific needs for the standard, oversize and undersized fasteners used in the aircraft/aerospace industry.  The sizes in this set have been machined to accommodate the following drill sizes:

Bushing Size

Number

Letter

Fractional

 

Bushing Size

Number

Letter

Fractional

0.0980

40

   

0.1990

8

  

0.1285

30

   

0.2010

7

  

0.1590

21

   

0.2160

3

  

0.1610

20

   

0.2460

 

D

 

0.1850

13

   

0.2500

  

1/4

0.1875

  

3/16

 

0.2610

 

G

 

0.1910

11

   

0.2795

 

K

 

0.1935

10

   

0.3125

  

5/16

Each Drill Bushing has been turned from Precision Ground Pennsylvania USA O-1 tool steel.  The outside diameter of the bushing has been held to a precise tolerance of 0.0501" ± 0.001”.    After the bushings have are machined, they are heat treated and tempered.  This process produces a bushing with a hardness measurement of 60+ on the Rockwell C scale, making the bushing extremely resistant to wear during use.

A tray is included in the set.  This tray is machined from 6061-T6 Aluminum.  The top of the tray is engraved with the bushing size for easy identification and organization in your tool box. The tray is anodized to ensure wear and scratch resistance and presents a professional appearance. We have also added rubber feet to the tray to improve stability in handling of the Drill Bushing Set

We have also incorporated a new feature not normally not found on drill bushing manufactured by others.  We have included a machined receptacle on the outside diameter of the drill bushing to mate with a set screw which has been designed and incorporated into both the SAS Drill Bushing Block, Drill Bushing Cup, and the soon to be released, Drill Bushing Stand.  

In the case of the Drill Bushing Cup and Drill Bushing Stand, we have installed a stainless-steel thread inset (sometimes referred to as a Helicoil) to add strength and wear resistance to the aluminum, to ensure long and trouble-free use of the retaining set screw.